For those of you that were curious, here is a tutorial on how to make a Striped Anchor board.
1x8 in. Pine board
.91 or 1 in. Edge lock Blue Painter's Tape
White paint
Vinyl color of your choice
Paint brush or sponge brush
Cut your pine board 10 inches in length.
Tape off your board. I used 4 strips of tape. I spaced them roughly 1 1/4 in. apart. Make sure to come in from the edges 1 1/4 in. Press down firmly on the edges of the tape so there a good lock and the paint won't run into the taped off areas.
Apply your white paint. You can apply a couple of coats to make it more thick.
Once your paint is dry, remove the tape.
I cut an Anchor out of Vinyl on my Silhouette Cameo. It measures Roughly 6 in. tall by 5 in. wide. Apply.
Project complete. To make the board stand up, Drill a hole in the back and cut a dowel to fit the hole you drilled or you could hang it on the wall.
These turned out so fun!
The striped anchor board was a staple at the turn of the 20th century and has recently received a resurgence in popularity. It's basically a wooden piece of furniture that you place on the floor. You can check https://www.essaymama.com/write-my-essay/ and know new very interesting skills of education. It usually has a small glass bowl on a wooden base, and it tends to be used as an accent piece that helps kick off a formal dining room.
ReplyDelete